RESOURCES · FAQ
Resources & FAQ
Documents and answers to common questions for evaluating our products and technology.
Documents & References
ElecHub Introduction
Power-electronics design platform overview
3 kW Certified Test Record
Gyeongbuk Technopark Wireless Power Transfer Technology Center · 2025.10 · Test report WPTC-2510-C004
View test record →Certifications & Awards
ISO 9001 and ISO 45001 certifications and awards
View certifications & awards →Publication
S. Huh et al., “Transmitter Coils Selection Method for Wireless Power Transfer System With Multiple Transmitter Coils and Single Receiver Coil,” IEEE Transactions on Power Electronics, vol. 38, no. 3, pp. 4092–4109, March 2023.
Frequently Asked Questions
Do robots need to dock precisely to charge?
No. An array of small transmitter coils estimates the receiver's position from the transmitter current alone (no communication link) and switches on only the coils with the strongest coupling. In certified testing, efficiency stayed at 95.6% even with 100 mm misalignment.
Under what conditions was the 95.7% efficiency measured?
It was measured on a 3 kW-class system for mobile robots, on a DC-DC basis, in testing at the Gyeongbuk Technopark Wireless Power Transfer Technology Center (2025.10). In the same test, efficiency was 95.6% with 100 mm misalignment. Test report No. WPTC-2510-C004.
How strong is the leakage magnetic field?
Because only the needed coils are driven, the field is concentrated toward the receiver and leakage is reduced. The magnetic field at 20 cm is 4.23 µT (limit: 6.25 µT or less), and the system meets IEC 61980 EMI requirements.
What power levels do you offer?
We offer 100 W and 300 W compact modules, a 2 kW-class single-coil module, 600 W charging systems for quadruped robots and drones, and the 3 kW multi-coil charging station. Humanoid charging is in development. The 100 W, 300 W and 2 kW specifications are based on draft datasheets.
Can you design a solution for our robot or drone?
Yes. Through custom design (NRE), we take OEM and defense specifications from coil and circuit design to prototype. You can get a custom coil quote right away in the Store.
Can it be used outdoors?
Charging is contactless with no exposed terminals, which suits outdoor operation in dust, moisture and rain. The 600 W-class drone wireless charging station completed outdoor field operation in September 2026. Tell us about your site conditions and we will review them with you.
Which certifications do you hold?
We hold ISO 9001:2015 (quality management) and ISO 45001:2018 (occupational health and safety) certifications, scoped to the design and manufacturing of wireless charging modules for robots and drones. KC, CE and FCC certification is on our 2027 roadmap.
What is ElecHub?
A power-electronics design platform that takes you from a one-line requirement to topology recommendation, calculations, BOM and SPICE verification. It is available at elechub.ai.